Nikon P-FLA2, Инструкция по эксплуатации, Страница: 32 / 43

E-12
I
Names of Component Parts
P-FLA2 fluorescence attachment (right-side view)
(This picture shows the P-FLA2 with the
P-FLA-HGA adapter.)
P-FLA2 fluorescence attachment (left-side view)
(This picture shows the P-FLA2 with the
P-FLA-HGA adapter.)
Eyepiece tube mount
Bayonet mount
Attach the
specified
lamphouse.
Optical path switchover lever
Set to BINO for observation through eyepieces.
Set to PHOTO to take photos or to monitor the
fluorescence image through the fluorescence
attachment port. (When the optical path is set
to PHOTO, the image cannot be observed
through the left eyepiece.)
Filter cube
Excitation
plates
Dia-filter cube
Eyepiece tube clamp screw
Filter cube mounts
Always set four filter cubes.
Shutter slider
Push in the slider to put the shutter in the
optical path to block the light from the light
source. To prevent the sample from fading,
place the shutter in the optical path whenever
you remove your eyes off the eyepieces.
Make this a habit to protect important samples.
Excitation plates
Indicate the excitation methods of the
filter cubes set inside the attachment.
Filter cubes switchover lever
Move the lever to put the desired filter
cube in the optical path.
Fluorescence attachment
port clamp screw
Fluorescence attachment
port mount
To take photos or to monitor
fluorescence images, attach the
fluorescent attachment port P-
FLAP or P-FLAP2 here. And
then, attach the proper adapter
and a photomicrographic device
or video camera.
Fluorescence attachment
port (P-FLAP or P-FLAP2)
(This picture shows the P-FLAP.)