Nikon NPL-322, Инструкция по эксплуатации

Страница: 64 / 197

3 Getting Started
50 Total Station NPL-322 Instruction Manual
4. Press the
Ctrl
softkey.
5. Press the
Yes
softkey.
For more information, see Creating a control job,
page 49 .
Measuring Distances
Sighting a prism reflector
C
WARNING – Never look at the sun through the telescope. If you do, you may damage or lose
your eyesight.
C
WARNING – Precautions should be taken to ensure that persons do not look directly, with or
without an optical instrument, into the beam.
C
WARNING – Laser beam path should be located well above or below eye level wherever
practicable.
* The hazard distance is the distance from the laser at which beam irradiance or
radiant exposure equals the maximum permissible value to which personnel may
be exposed without being exposed to health risk.
When you enter a point name or number, the system searches in the current job first. If the point is not found in
the current job, the search is automatically extended to the control job. If the point is found in the control job, the
selected point is copied to the current job as a UP record.
For information on how to assemble the prism reflector, see Setting Up the Prism Reflector, page 21 .