Pour votre sécurité
A
AVERTISSEMENT
• Ne démontez pas ou ne modifi ez pas ce produit.
Ne touchez pas les composants internes qui sont exposés suite à une chute
ou à un autre accident.
• Si vous observez des anomalies provenant du produit comme de la fumée,
de la chaleur ou des odeurs inhabituelles, débranchez immédiatement la
source d’alimentation de l’appareil photo.
• Gardez votre matériel au sec.
Ne le manipulez pas avec les mains mouillées.
• N’utilisez pas ce produit en présence de poussières ou de gaz infl ammables
comme du propane, de l’essence ou des aérosols.
• N’observez pas directement le soleil ou autre source lumineuse puissante à
travers l’objectif ou l’appareil photo.
• Conservez ce produit hors de portée des enfants.
• Ne manipulez pas le matériel à mains nues dans des lieux exposés à des
températures extrêmement basses ou élevées.
A
ATTENTION
• Ne pointez pas l’objectif en direction du soleil ou d’autres sources très lumineuses.
• Ne laissez pas le produit exposé à des températures excessivement chaudes
pendant une période prolongée, comme dans une voiture fermée ou en plein soleil.
• Ne transportez pas les appareils photo ou les objectifs si des trépieds ou
accessoires similaires sont fi xés.
Avis pour les clients au Canada
Utilisation de l’objectif
Descriptif de l’objectif : noms et fonctions
●
Fixation et retrait
Écran d’informations sur l’objectif
Options de l’écran
Fixation et retrait du parasoleil
Lorsque l’objectif est fi xé
En
User’s Manual
Fr
Manuel d’utilisation
Es
Manual del usuario
NIKKOR Z 24-70mm f/2.8 S
Précautions d’utilisation
Entretien de l’objectif
Accessoires
Accessoires fournis
Accessoires compatibles
Caractéristiques
Monture
Focale
Ouverture maximale
Construction optique
Angle de champ
Échelle des focales
Système de mise au point
Distance minimale de
mise au point
Rapport de
reproduction maximal
Lamelles de diaphragme
Plage des ouvertures
Diamètre de fi xation
pour fi ltre
Dimensions
Poids
Printed in Japan
SB9A01(30)
7MMA2030-01
En
User’s Manual
Before using this product, please read these instructions carefully. You will also need to
consult the camera manual.
• This lens is intended exclusively for use with mirrorless cameras featuring a Nikon Z mount.
For Your Safety
For Your Safety
To prevent damage to property or injury to yourself or to others, read “For Your Safety”
in its entirety before using this product.
Keep these safety instructions where all those who use this product will read them.
A
WARNING:
Failure to observe the precautions marked with this icon could
result in death or severe injury.
A
CAUTION:
Failure to observe the precautions marked with this icon could
result in injury or property damage.
A
A
WARNING
WARNING
•
• Do not disassemble or modify this product.
Do not disassemble or modify this product.
Do not touch internal parts that become exposed as the result of a fall or
Do not touch internal parts that become exposed as the result of a fall or
other accident.
other accident.
Failure to observe these precautions could result in electric shock or other injury.
• • Should you notice any abnormalities such as the product producing smoke, heat, or
Should you notice any abnormalities such as the product producing smoke, heat, or
unusual odors, immediately disconnect the camera power source.
unusual odors, immediately disconnect the camera power source.
Continued operation could result in fi re, burns or other injury.
•
• Keep dry.
Keep dry.
Do not handle with wet hands.
Do not handle with wet hands.
Failure to observe these precautions could result in fi re or electric shock.
•
• Do not use this product in the presence of fl ammable dust or gas such as
Do not use this product in the presence of fl ammable dust or gas such as
propane, gasoline or aerosols.
propane, gasoline or aerosols.
Failure to observe this precaution could result in explosion or fi re.
•
• Do not directly view the sun or other bright light source through the lens
Do not directly view the sun or other bright light source through the lens
or camera.
or camera.
Failure to observe this precaution could result in visual impairment.
•
• Keep this product out of reach of children.
Keep this product out of reach of children.
Failure to observe this precaution could result in injury or product malfunction. In
addition, note that small parts constitute a choking hazard. Should a child swallow any
part of this product, seek immediate medical attention.
•
• Do not handle with bare hands in locations exposed to extremely high or
Do not handle with bare hands in locations exposed to extremely high or
low temperatures.
low temperatures.
Failure to observe this precaution could result in burns or frostbite.
A
A
CAUTION
CAUTION
•
• Do not leave the lens pointed at the sun or other strong light sources.
Do not leave the lens pointed at the sun or other strong light sources.
Light focused by the lens is a source of fi re and damage to the product’s internal parts.
•
• Do not leave the product where it will be exposed to extremely high
Do not leave the product where it will be exposed to extremely high
temperatures, for an extended period such as in an enclosed automobile
temperatures, for an extended period such as in an enclosed automobile
or in direct sunlight.
or in direct sunlight.
Failure to observe this precaution could result in fi re or product malfunction.
•
• Do not transport cameras or lenses with tripods or similar accessories
Do not transport cameras or lenses with tripods or similar accessories
attached.
attached.
Failure to observe this precaution could result in injury or product malfunction.
Notices for Customers in the U.S.A.
Notices for Customers in the U.S.A.
This device complies with part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Federal Communications Commission (FCC) Radio Frequency Interference
Federal Communications Commission (FCC) Radio Frequency Interference
Statement
Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CAUTIONS
CAUTIONS
Modifi cations
The FCC requires the user to be notifi ed that any changes or modifi cations made to
this device that are not expressly approved by Nikon Corporation may void the user’s
authority to operate the equipment.
Nikon Inc., 1300 Walt Whitman Road,
Melville, New York 11747-3064, U.S.A.
Tel.: 631-547-4200
Notice for Customers in Canada
Notice for Customers in Canada
CAN ICES-3 B / NMB-3 B
Using the Lens
Using the Lens
Parts of the Lens: Names and Functions
Parts of the Lens: Names and Functions
Refer to the diagram on the left edge of this sheet.
q
Lens hood mounting
mark
Use when attaching the lens hood.
See
D
w
Focus ring
Use for manual focus. When focusing using
autofocus, you can adjust focus manually by
rotating the ring while the shutter-release but-
ton is pressed halfway; after focusing, press
the shutter-release button the rest of the way
down to shoot.
—
e
Zoom ring
Rotate to zoom in or out.
—
r
Focal length scale
Determine the approximate focal length when
zooming the lens in or out.
—
t
Focal length mark
y
Lens info panel
View focus distance, depth of fi eld, and other
information.
See
B
,
C
u
Control ring
Rotate to adjust a setting such as
Aperture
or
Exposure compensation
assigned using the cam-
era. For more information, see the description
of
Custom control assignment
in the camera
manual.
—
i
Lens mounting mark
Use when mounting the lens on the camera.
See
A
o
Rubber lens-mount
gasket
—
—
!0
CPU contacts
Used to transfer data to and from the camera.
—
!1
L-Fn
button
Press to perform a function assigned using the
camera. For more information, see the descrip-
tion of
Custom control assignment
in the camera
manual.
—
!2
Display button
Save settings or choose the information shown
in the lens info panel.
See
B
,
C
!3
Focus-mode switch
Choose
A
for autofocus,
M
for manual focus.
Note that regardless of the setting chosen, fo-
cus must be adjusted manually when manual
focus mode is selected using camera controls.
—
!4
Lens hood lock mark
Use when attaching the lens hood.
See
D
!5
Lens hood
Lens hoods block stray light that would other-
wise cause fl are or ghosting. They also serve to
protect the lens.
●
!6
Lens hood alignment
mark
Use when attaching the lens hood.
!7
Hood release
Use when removing the lens hood.
!8
Front lens cap
—
—
!9
Rear lens cap
—
—
A
Attachment and Removal
Attachment and Removal
Attaching the Lens
z
Turn the camera off , remove the body cap, and detach the rear lens cap.
x
Position the lens on the camera body, keeping the mounting mark
on the lens aligned with the mounting mark on the camera body,
and then rotate the lens counterclockwise until it clicks into place.
Removing the Lens
z
Turn the camera off .
x
Press and hold the lens release button while turning the lens clockwise.
B
The Lens Info Panel
The Lens Info Panel
The lens Info panel lights when the lens is at-
tached to a camera and the camera is on.
Press the display button to cycle the display as shown:
Display button
Depth of fi eld
Aperture*
Focal length
Focus distance
* Aperture is displayed only when the camera is
in mode
A
or
M
. The display for other modes is
shown in the illustration.
• The focus mode (
AF
or
MF
) is briefl y displayed when chosen using the focus-
mode switch.
• The panel turns off automatically when the camera standby timer expires or if
no lens operations are performed for about 10 seconds. Press the display button
to reactivate the display.
A
The Lens Info Panel
The focus distance, depth of fi eld, and other information displayed in the lens Info panel are approxima-
tions only.
C
Panel Options
Panel Options
Follow the steps below to choose the units for focus distance from meters (
m
) or
feet (
ft
) or adjust the brightness of the lens Info panel.
z
Press and hold the display button to view settings.
• Unit or brightness selection options will be displayed. The currently select-
ed item will fl ash.
• Press the display button to toggle between displays.
Units
Brightness
x
Choose a setting using the lens control ring.
Units
-
Rotate the control ring to choose from me-
ters (
m
) or feet (
ft
).
Brightness
-
Rotate the control ring in the “+” (brighter)
or “−” (darker) direction.
-
Choose from 6 levels of brightness.
-
To turn the lens info panel off , rotate the
ring in the “−” direction until the
icon
changes to
.
• Press the display button to save changes and toggle the display.
• If no operations are performed using lens controls for about 5 seconds,
panel options will clear from the display and changes will be canceled.
c
Press and hold the display button to return to the lens information dis-
play.
• Choosing
for brightness turns the lens info panel off . To turn the display
on again, press and hold the display button.
D
Attaching and Removing the Lens Hood
Attaching and Removing the Lens Hood
Attaching the Lens Hood
Align the lens hood mounting mark with the lens hood alignment mark (
q
) and
then rotate the hood (
w
) until the mounting mark is aligned with the lens hood
lock mark (
e
).
Lens hood lock mark
Lens hood alignment mark
Lens hood mounting mark
When attaching or removing the hood, hold it near the lens hood alignment mark (
●
)
and avoid gripping the front of the hood too tightly. The hood can be reversed and
mounted on the lens when not in use.
Removing the Lens Hood
Keeping the hood release pressed (
q
), rotate the hood in the direction shown
(
w
) and remove it from the lens (
e
).
Hood release
The same procedure can be used when the hood is reversed.
When the Lens Is Attached
When the Lens Is Attached
The focus position may change if you turn the camera off and then on again after
focusing. Refocus before shooting. If you have focused on a pre-selected location while
waiting for your subject to appear, we recommend that you do not turn the camera off
until the picture is taken.
Precautions for Use
Precautions for Use
• Do not pick up or hold the lens or camera using only the lens hood.
• Keep the CPU contacts clean.
• Should the rubber lens-mount gasket be damaged, cease use immediately and take
the lens to a Nikon-authorized service center for repair.
• Replace the front and rear lens caps when the lens is not in use.
• To protect the interior of the lens, store it out of direct sunlight.
• Do not leave the lens in humid locations or in locations in which it may be exposed to
moisture. Rusting of the internal mechanism can cause irreparable damage.
• Do not leave the lens next to open fl ames or in other extremely hot locations. Ex-
treme heat could damage or warp exterior parts made from reinforced plastic.
• Rapid changes in temperature may cause damaging condensation inside and outside
the lens. Before taking the lens from a warm to a cold environment or vice versa, place
it in a bag or plastic case to slow the change in temperature.
• We recommend that you place the lens in its case to protect it from scratches during
transport.
Lens Care
Lens Care
• Removing dust is normally suffi
cient to clean the glass surfaces of the lens.
• The fl uorine-coated front and rear lens elements can be cleaned as described below.
-
Smudges, fi ngerprints, and other oily stains can be removed using a soft, clean cot-
ton cloth or lens cleaning tissue; clean from the center outwards using a circular
motion.
-
To remove stubborn stains, wipe gently using a soft cloth lightly dampened with a
small amount of distilled water, ethanol, or lens cleaner.
-
Any drop-shaped marks left from this process on the water- and oil-repellent sur-
face can subsequently be removed with a dry cloth.
• Never use organic solvents such as paint thinner or benzene to clean the lens.
• Neutral Color (NC) fi lters (available separately) and the like can be used to protect the
front lens element.
• If the lens will not be used for an extended period, store it in a cool, dry location to
prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor
moth balls.
Accessories
Accessories
Supplied Accessories
Supplied Accessories
• LC-82B 82 mm snap-on Front Lens Cap
• LF-N1 Rear Lens Cap
• HB-87 Bayonet Hood
• CL-C2 Lens Case
D
Using the Lens Case
• The case is intended to protect the lens from scratches, not from falls or other physical shocks.
• The case is not water resistant.
• The material used in the case may fade, bleed, stretch, shrink, or change color when rubbed or wet.
• Remove dust with a soft brush.
• Water and stains can be removed from the surface with a soft, dry cloth. Do not use alcohol, benzene, thinner,
or other volatile chemicals.
• Do not store in locations exposed to direct sunlight or high temperatures or humidity.
• Do not use the case to clean the monitor or lens elements.
• Be careful that the lens does not fall from the case during transport.
Material: Polyester
Compatible Accessories
Compatible Accessories
82 mm screw-on fi lters
D
Filters
Use only one fi lter at a time. Remove the lens hood before attaching fi lters or rotating circular polarizing fi lters.
Specifi cations
Specifi cations
Mount
Mount
Nikon Z mount
Focal length
Focal length
24 – 70 mm
Maximum aperture
Maximum aperture
f/2.8
Lens construction
Lens construction
17 elements in 15 groups (
including 2 ED elements, 4 aspherical elements,
elements with Nano Crystal and ARNEO coats, and fl uorine-coated front and rear lens
elements)
Angle of view
Angle of view
• FX format: 84°–34° 20
c
• DX format: 61°–22° 50
c
Focal length scale
Focal length scale
Graduated in millimeters (
24, 28, 35, 50, 70
)
Focusing system
Focusing system
Internal focusing system
Minimum focus
Minimum focus
distance
distance
0.38 m (
1.25 ft
) from focal plane at all zoom positions
Maximum repro-
Maximum repro-
duction ratio
duction ratio
Approx. 0.22×
Diaphragm
Diaphragm
blades
blades
9
(rounded diaphragm opening
)
Aperture range
Aperture range
f/2.8 – 22
Filter-attachment
Filter-attachment
size
size
82 mm
(P = 0.75 mm)
Dimensions
Dimensions
Approx. 89 mm/3.6 in. maximum diameter × 126 mm/5 in.
(distance from camera lens mount fl ange)
Weight
Weight
Approx. 805 g
(1 lb 12.4 oz)
Nikon reserves the right to change the appearance, specifi cations, and performance of this
product at any time and without prior notice.
