Nikon MB-D12, Руководство пользователя

Страница: 11 / 244

7
En
Inserting Batteries Inserting Batteries
The MB-D12 can be used with one EN-EL15 or EN-EL18 rechargeable Li-ion battery, or with eight AA batteries. A BL-5 battery-chamber cover (avail-
able separately) is required when using an EN-EL18 battery.
Before inserting batteries, be sure that the camera is off and that the MB-D12 control lock is in the L position.
1 Turn the MB-D12 battery-chamber latch to and remove the battery holder (Figure E).
2 Ready the batteries as described below.
EN-EL15 : Matching the indentations on the battery to the projections on the MS-D12EN holder, insert the battery with the arrow (
▲
) on the bat-
tery toward the battery holder power terminals (Figure F- q ). Press the battery lightly downward and slide it in the direction of the arrow until
the power terminals click into place (Figure F- w ).
EN-EL18 : If the battery release on the optional BL-5 battery-chamber cover is positioned so that the arrow
Y
is visible, slide the battery release to
cover the arrow (Figure G- q ). Insert the two projections on the battery into the matching slots on the BL-5 (Figure G- w ) and confi rm that the
battery release has slid aside to reveal the arrow.
AA batteries : Place eight AA batteries in the MS-D12 battery holder as shown in Figure H, making sure that the batteries are in the correct orientation.
3 Insert the battery holder in the MB-D12 and latch the battery-chamber cover (Figure I). Make sure the holder is fully inserted before turning the latch.
4 Turn the camera on and check the battery level in the control panel or viewfi nder. If the camera does not turn on, check that the battery is cor-
rectly inserted.
The EP-5B Power Connector
When using the EP-5B power connector, insert it into the MS-D12EN holder with the arrow (
▲
) on the connector toward the battery power terminals. Press
the connector lightly downward and slide it in the direction of the arrow until the power terminals click into place (Figure J-
q
). Open the holder power
connector cover and pass the EP-5B power cable through the opening (Figure J- w ).