Nikon FM3A, Инструкция по эксплуатации

Страница: 14 / 56

14
200001
Loading Film (Continued)
5
Advance the film on the film-
takeup spool.
6
Check the position of the film.
... Make sure that the film sprocket holes are per-
fectly meshed with the film sprockets and that
the film is correctly set between the film guide
rails.
... To advance the film on the film-takeup spool,
pull out the film-advance lever to the standoff
position and wind it slowly.
... Wind the film-advance lever
1
and press the
shutter-release button
2
until the frame
counter indicates frame 1.
... Adjust the shutter-speed dial to a high speed
other than “A.”
...
1
Slowly close the door of the camera back
until it snaps shut into the camera body.
...
2
Pull out the film-rewind crank and rotate it
in the direction of the arrow until it stops to
take up the slack inside the film cartridge.
7
Close the camera back and take
up the film slack.
8
Make a few blank exposures.
• If the film-rewind knob fails to rotate when you wind the film-advance lever, reload
the film cartridge.
• Repeat making blank exposures until the frame counter indicates frame 1.