35
34
Film
DETAILED OPERATION (FILM)
Confirming an automatically set film speed
• To confirm the automatically set film speed of your loaded DX-coded film,
press the
h
and
g
buttons simultaneously. Note that pressing the
h
and
g
buttons for more than 2 sec. resets all of the functions. (For “Two-Button
Reset”, see page 57.)
Mid-roll rewind
• To rewind film at mid-roll, press the
U
(mid-roll rewind) button with a pointed
object. When film is completely rewound,
fl
appears and
T
blinks in the LCD
panel. Open the camera back and remove the film cartridge.
In case film does not start to rewind or film rewind stops at mid-roll
• When battery power is very low, or in low temperatures, film may not start
rewinding or film rewind may stop at mid-roll, and
T
and
‹
will blink in the
LCD panel. In this case, turn off the main switch, change batteries, then turn on
the main switch to rewind film again.
Film advance mode
• Film advance mode is normally set to single-frame shooting, where the film is
advanced one frame after you release the shutter. Selecting Sport Program
automatically switches the film advance mode to continuous shooting, where
the shutter is continuously released and the film continues to advance (approx.
1 frame/sec.) for as long as the shutter release button remains depressed.
F60 (E) 02.12.27 5:34 PM Page 34
WWW.LENSINC.NET