Confirm Indications in Viewfinder and Release Shutter
7
7.
1
7.
2
7.
3
i
Focus, shutter speed and aperture can be confirmed in the viewfinder.
If any other indications appear, see page 70.
i
When you reach the end of the film roll, the film starts to rewind
automatically.
i
For mid-roll rewind, see page 34.
i
For self-timer operation, see page 55.
y
Check points
BASIC OPERATION
26
Confirm that
u
(focus indicator)
appears in the viewfinder, then
release the shutter by slowly
and fully depressing the shutter
release button.
Confirm focus indicator
u
appears without blinking
and slowly depress the shutter release button.
Confirm indications in the viewfinder while lightly
pressing the shutter release button.
• When
j
(ready-light indication) blinks, use the built-in Speedlight. (See
page 28/58.)
• If a warning indication appears in the viewfinder, see page 70.
• After shutter is released, the film automatically advances to the next frame
and the next shot can be taken.
Film starts to rewind automatically when film reaches
the end of the roll.
• When you reach the end of the film roll, the film starts to rewind
automatically.
T
appears in the LCD panel during film rewind and the
frame counter counts backwards until rewind is complete. Pictures taken
on frames beyond the indicated number of the exposures for the film roll
may be discarded due to development procedures.
7.
4
Confirm film is completely rewound, then remove film
cartridge.
• Film is completely rewound when the frame counter shows “
fl
” and
T
blinks. Open the camera back away from sunlight and remove the film
cartridge by tilting it to one side. If the shutter release button is depressed
when rewound film is still in the camera back, “
T
” blinks. Remove film
cartridge.
27
F60 (E) 02.12.27 5:34 PM Page 26
WWW.LENSINC.NET
