4
PREP
ARA
TION
23
22
Set Date and Time (F55D only)
This camera allows you to imprint Year/Month/Day, Day/Hour/Minute (24-hour
clock), Month/Day/Year or Day/Month/Year on your picture in any exposure
mode. (For imprinting date/time, see page 44.)
1
Push MODE button to select one of the date or time
displays. Push SELECT button so section to be corrected
starts blinking.
•
Adjusting date and time (Example: year 2002, January 15)
2
Push ADJUST button to change the blinking numbers and after
correction, push SELECT button until the numbers stop blinking.
NOTE: Battery requirements for imprinting
Imprinting of date/time requires one CR2025 3V lithium battery separate from the
batteries required for the camera body. Battery life is approx. 3 years. When the
imprinting on the photo appears faded and/or the display of the data imprint on the
LCD becomes faint or disappears, this indicates low battery power. Replace the
battery (making sure to set correct date/time after changing battery).
1
Open camera back, remove the battery chamber cover for
imprinting by removing the screw using a screwdriver.
•
Changing battery for imprinting
2
Remove the used battery and insert a new CR2025 3V
lithium battery with
´
side facing up. Attach the battery
chamber cover by reinserting the screw.
NOTE: Storing batteries
Keep the batteries out of children’s reach. If swallowed, contact a doctor immediately.
(For “Notes on Batteries”, see page 102.)
• Date cannot be set in Day/Hour/Minute display. To set date, select
Year/Month/Day, Month/Day/Year or Day/Month/Year.
• Set the time in Day/Hour/Minute display.
• Each time you push the ADJUST button, year section moves up from 98 to 49 (back
to 98 after 49).
• To change the numerical indication rapidly, hold the ADJUST button down for
more than 1 sec.
• Push SELECT button until the date/time display stops blinking. When the imprint
indicator
—
appears in the data imprint LCD panel, the setting is complete.
• Use a pointed object to remove the battery.
F55 (E) 03.4.15 7:51 PM Page 22