Nikon Eclipse E400, Инструкция по эксплуатации

Страница: 9 / 21

8
II
Microscopy
If the system has not yet been assembled, see section “III. Assembly” first.
For details on assembling and handling the microscope, see the instruction manual supplied
with the microscope.
Depending on the type of set you have purchased, some of the components described below
may not be included.
1
Adjust the microscope correctly.
The secondary observer will view the same image as the main observer. If the main observer
does not adjust the microscope correctly, the secondary observer will not be able to view a
correct image. Also when the main observer did not perform the diopter adjustment, the
secondary observer is likely to have his image out-focused each time the main observer
changes the objective magnification. Be sure to perform the diopter adjustment referring to the
instruction manual supplied with the microscope.
2
Adjust the diopter setting at the secondary observer’s position as
well.
After the main observer has adjusted the microscope correctly, the secondary observer should
bring the image into focus with the diopter adjustment rings. Set the dioptor adjustment rings
for both the left and right eyes.
3
Method for simple diopter adjustment
When a pointer is attached to the system, turn the respective diopter adjustment rings on the
left and right eyepieces to bring the arrow into focus. It is needed to change the arrow color to
green, and to move the arrow to near the center of view field in advance. This completes
diopter adjustment.