2. Assembling
8
3
Attaching the camera to the microscope
1. Insert the vertical tube sleeve of the C-mount adapter into the vertical tube on the
microscope.
2. Use clamping screws to secure the sleeve and the tube.
4
Connecting the camera and the PC with the interface cable
Caution
Be sure to shut down the PC before starting this task.
Use the interface cable to connect the interface board connector and the connector on the
camera.
5
Turning ON the PC power
Turn ON the power to your PC. When you start Windows for the first time after the
interface board has been attached, “Windows has found new hardware, and is locating
the software for it.” appears. At this time, install the interface board driver. See The
DIGITAL CAMERA DXM1200C for Microscope — Software Instruction Manual for more
information on installing the driver.
Supplementary information
The camera is powered by the PC via the interface board.
6
Installing the application program
See the DIGITAL CAMERA DXM1200C for Microscope — Software Instruction Manual
for more information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
