Nikon DS-Qi2, Инструкция по эксплуатации

Страница: 6 / 33

Safety Precautions
iv
Safety Precautions
To ensure correct and safe operation, read this manual before using this product.
WARNING and CAUTION Symbols
Although this product is designed and manufactured to be completely safe during use, incorrect usage or failure to follow the
safety instructions provided may cause personal injury or property damage. To ensure correct usage, read this manual
carefully before using this product. Do not discard this manual and keep it handy for easy reference.
Safety instructions in this manual are marked with the following symbols to indicate their importance. For your safety, always
follow the instructions marked with these symbols.
Symbol Description
WARNING
Disregarding instructions marked with this symbol may lead to serious injury or death.
CAUTION
Disregarding instructions marked with this symbol may lead to injury or property damage.
!
WARNING
1. Purpose of this product
The principal use of this product is to photograph and display pictures. Do not use this product for other
purposes.
2. Read this manual carefully.
For your safety, read carefully this manual and other manuals supplied with the products that will be used
together with this product. Be sure to read and observe the warnings and cautions described at the beginning of
each manual.
3. Do not disassemble, repair, or modify this product.
Do not attempt to disassemble, repair, or modify this product. Doing so may result in electric shock or failure.
Any failure or damage caused by such action will not be covered under warranty. Never attempt to disassemble,
repair, or modify any part of this product which is not described in this manual. If you notice any problems with
this product, contact your nearest Nikon representative.
Note especially that the AC adapter for the product has a built-in high-voltage power source. Never dismantle,
repair, or modify it.
4. If the inside of this product is exposed due to breakage, never touch the exposed area.
If this product is broken due to falling, etc. and the inside is exposed, do not touch the exposed area. Doing so
may cause an electric shock or personal injury on the jagged broken edge. Remove the battery or power cord
and ask your nearest Nikon representatives for repair.
5. Connect the AC adapter directly to a 100 to 240 VAC (frequency of 50 to 60 Hz) power socket.
The AC adapter for this product supports input of 100 to 240 VAC (frequency of 50 to 60 Hz). Be sure to connect
the AC adapter to a power source within the range above, as well as the rated voltage range specified for the
power cord. Failure to do so may cause an incident such as malfunction, fire, etc.
6. Use the specified power cords.
Make sure to use the specified power cord for the AC adapter. If any other power cords are used, it may cause
malfunction or overheating of this product or fire.

For details about the specified power cords, see “Chapter 7 Major Specifications.”

When plugging or unplugging the power cord, make sure that the product is switched off to avoid
electrification.

The AC adapter for this product falls under the category of electric shock protection class I. Always make
sure it is grounded to a protective ground terminal.