Using Nikon View 4 with Windows XP Home Edition / Windows XP Professional (D1 Series)
xp-2
Step 4
If your OHCI-compliant IEEE 1394 interface board or card has been cor-
rectly registered with the system, the bus controller for your IEEE 1394
board or card should be listed under “1394 Bus Host Controller”. If “1394
Bus Host Controller” is not listed in the Device Manager, or if your IEEE
1394 interface board or card is listed as an unknown or miscellaneous
device or is preceded by a red or yellow warning icon, follow the instruc-
tions in the manual provided with the board to ensure that the drivers are
properly installed.
Step 6
The “Found New Hardware Wizard” will be displayed. Confirm that “In-
stall driver from a list or specified location” is selected and click Next. If
the “Found New Hardware Wizard” dialog does not appear, click here
to refer to
Reinstalling the Device Drivers
(page xp-5)
Step 5
Turn on the D1 (D1
X
/D1
H
), make sure that the mode dial is set to PC, and
then connect the camera to the computer using an IEEE 1394 cable.
