90
❚❚
Camera Controls
1
Assign image area selection to a camera control.
Use Custom Setting f1 (
Custom control assignment
301)
to assign
Choose image area
to a control.
2
Use the selected control to choose an image area.
The image area can be selected by pressing the selected
control and rotating the main or sub-command dial until the
desired crop is displayed in the viewfinder (
The option currently selected for
image area can be viewed by pressing
the control to display the image area
in the control panel or information
display. DX format is displayed as
“
24z16
” and 1.3× as “
18z12
”.
A
See Also
See page 70 for information on the crops available for movie recording.