Nikon coolpix7900, Руководство по ремонту

Страница: 99 / 111

VAA46003-R.3659.A
- R1･ E7900 -
Item Criteria Applied tool(s)
External view
Gap/Difference in
height
Outside and inside
status
・ General components
Gap: 0 . 3 mm or less
Difference in height: 0 . 15 mm or less
・
Clearance between the battery case and the back surface of the
rear cover: 0 . 5 mm or less : 0 . 3 mm or less when there is a bulge.
・ Clearance between the SD card cover, the belt and the rear cover:
Total clearance of the up-and-down direction: 0 . 45 mm or less
Play in the up-and-down direction: 0 . 2 mm or less
・
There must be no noticeable damage, soil, sink mark, welded
mark, crack or oil exudation.
Visual observation
Visual observation
Operation/Operability
Operation
Operability of buttons
Mode/Dial
・ While operating, any irregularities or irregular noise shall not be
required.
(Check it by shaking the camera while operating.)
(Lightly hit the camera onto the Linoleum-laid desk while
operating.)
・ No cave-ins of the buttons shall be required.
・
Operator must feel "click" on each button.
・ "Click" must occur when or after a switch is ON.
・
Buttons must be pressed by the belly of your finger.
(Check it while operating normally.)
・
When clicking, normal touch shall be required. Any outstanding
"caught-in-mechanism" touch or "rubbed-in-mechanism" touch or
play shall not be required.
(Check and observe the condition through normal operation.)
Primary battery/
Secondary battery
INSPECTION STANDARDS