Nikon COOLPIX S2700, Справочное руководство

Страница: 81 / 204

65
Face Detection
Sh
oot
in
g
F
e
a
tures
B
Notes About Face Detection Function
• The camera’s ability to detect faces depends on a variety of factors, including the direction in
which the faces are looking. The camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
• When the frame includes more than one face, the faces detected by the camera and the face on
which the camera focuses depend upon a variety of factors, including the direction in which the
faces are looking.
• In some rare cases, the subject may not be in focus despite the fact that the double border glows
green (
A
29). Should this occur, switch to
A
(auto) mode and set AF area mode to Manual or
Center . Try refocusing on another subject positioned at the same distance from the camera as the
actual portrait subject (
A
67).
B
Viewing Images That Were Captured Using Face Detection
• When images in which a face was detected during shooting are played back, the images will be
automatically rotated for playback display according to the orientation of the face detected,
except images captured using
Continuous , BSS , Multi-shot 1 6 (
A
37,
E
26), or Subject
tracking (
A
38,
E
31).
• In full-frame playback mode, the image is enlarged with the detected face (
A
31) at the center of
the monitor when the zoom control is rotated to
g
(
i
), except images that were captured using
Continuous , BSS , Multi-shot 1 6 (
A
37,
E
26), or Subject tracking (
A
38,
E
31).