129
Basic Camera Setup: The Setup Menu
S
h
oot
in
g, P
laybac
k
an
d Se
tu
p Me
nus
i
Sound Settings
Adjust the following sound settings.
k
Auto Off
When the camera is on and a specified period of time passes with no operations
performed, the monitor turns off and the camera will enter standby mode (
to save power. Once the camera has entered standby mode, the power-on lamp
will blink, and if no operations are performed for another three minutes, the
camera will turn off.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from
30
s
,
1
min
(default setting),
5
min
, and
30
min
.
C
Canceling Standby Mode
Cancel standby mode and reactivate the monitor by pressing any of the following buttons.
C
Note on Auto Off
Regardless of the option selected, the monitor will remain on for three minutes when menus are
displayed, a maximum of 30 minutes during slide show playback, and 30 minutes when the AC
adapter is connected.
C
Auto Off in Projector Mode
Use the
Auto off
145) option in the projector settings menu to specify the auto off setting for
projector mode.
d
button
M
z
(Setup menu) (
M
i
Sound settings
Button sound
Turn button sound
On
or
Off
.
When
On
(default setting) is selected, a beep will sound once when operations are
completed successfully, twice when focus has been locked, and three times when
an error is detected. Start-up sound will also play when the camera is turned on.
Shutter sound
Turn shutter sound
On
(default setting) or
Off
.
d
button
M
z
(Setup menu) (
M
k
Auto off
•
the power switch
•
the shutter-release button
•
the
A
button
•
the
c
button