manualshive.com logo in svg

Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8G IF, Руководство по ремонту, Страница: 85 / 100

Поделиться
Скачать
Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8G IF Скачать руководство пользователя страница 85

JAA78151－R.3584.A 

- L63・AF-S VR 70-200/2.8G - 

 VR LENS POSITION ADJUSTMENT  

 

  ①

Move the cursor to a box in front of the [VR Lens Position Adjustment] and click it to mark the check marking.

 

 

  ②

Move the cursor to the Execute button and click it.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  ・

VCM Polarity Adjustment (Controlled automatically)

 

   

Detect the polarity of the VCM (Voice Coil Motor) and write it in EEPROM as the compensation value.

 

   

In-between times, the message to confirm the lens position of angle (0 or 90degrees) appears. 

   

So, set the lens to the position and click the [OK] button. 

 

 

 

 

 

 

 

 

 

   

When [OK] is shown on the window, move the cursor to the Next button and click it.

 

 

 

③

The message like a picture on the left is shown.

Set the VR mode switch of the lens to ON (Full

or Release), and then move the cursor to the OK

button and click it.

 

INC

Содержание AF-S Zoom-Nikkor ED70-200mm f/2.8G IF





































































































Отзывы:

Нет отзывов