manualshive.com logo in svg

Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8G IF, Руководство по ремонту, Страница: 3 / 100

Поделиться
Скачать
Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8G IF Скачать руководство пользователя страница 3

JAA78151－R.3584.A 

 

※

BEFORE DISASSEMBLING, DISASSEMBLING AND ADJUSTING

 

 

①

This lens loads the VR (Vibration Reduction) unit to perform the vibration reduction function. 

To maintain the accuracy of the vibration reduction function, be sure to perform the VR adjustment by using the 

VR lens adjustment equipment (J15380) when removing the VR unit and Gyro PCB.   

However, the VR adjustment is not necessary when disassembling the other parts.

 

 

②

The optical axis between the 1st lens group and the VR unit has been adjusted so that the optical axis would not 

dislocate when the 1st group lens injects at zooming operation. 

When replacing the 1st lens group or removing the VR unit, it is necessary to adjust the optical axis by using 

the auto collimator and the special tool.

 

 

 

 

 

At the service facilities where [VR lens adjustment equipment] and [ Auto Collimator and Special Tool] are not 

set up, do not repair or disassemble the product applicable to the above.

 

 

INC

Содержание AF-S Zoom-Nikkor ED70-200mm f/2.8G IF





































































































Отзывы:

Нет отзывов