JAA62951-R.3615.A
- L13 ・ AF DX10.5/2.8G -
Slant adjustment of Rear lens goup / Adjustment of Resolving power
Rear lens group unit
#45×3
#43A
~
D
#66B
・
#66C
●
Inspect the resolving power by light projection. In case the resolving power is irregular partially
on periphery compared to the center of chart, make a slant adjustment.
・
In case the resolution is irregular due to front focus, make an adjustment by putting the washer (#66B or #66C)
on the irregular part, in order to even out.
・
In case the resolution is irregular due to rear foucs, replace the reference washer (#43C (t=0.03mm)) with the
washer (#43D (t=0.02mm)) and make an adjustment by putting the washer (#66B or #66C) to even out.
●
In case the resolving power of the periphery is out of standard compared to the center of chart,
make the following adjustment.
・
In case the resolution is irregular due to front focus, put the thicker washer (#43) for adjustment so that it is
within standard.
・
In case the resolution is irregular due to rear focus, put the thinner washer (#43) for adjustment so that it is within
standard.
※
Refer to “List of Standard resolving power” for standards of resolvng power.
Caution
:
After this adjustment, in case of loosening or removing the screw (#45)
of the rear lens goup unit, it is necessary to inspect the resolving power again.
Washer for adjusting
resolving power
Thickness
(mm)
# 43A
0.10
# 43 B
0.05
# 43 C
0.03
# 43D
0.02
Washer for adjusting slant
Thickness
(mm))
# 66B
0.03
# 66C
0.02