JAA62951-R.3615.A
- L9・ AF DX10.5/2.8G -
Encoder brush
①
Turn the inner helicoid, which was assembled in the fix-ring at the innermost part, through about 45°
clockwise.
②
Attach 2 screws (#30) at "C part", first.
③
Attach 2 stoppers for focus ring (#31), and 2 screws (#32).
④
Attach the FPC retaining plate (#33) and the screw (#34).
⑤
Attach the encoder brush (#16), brush sheet (#17), 2 insulating collars (#18), and 2 screws (#19)
temporarily.
Position for attaching Encoder brush
・
Turn the focus ring to the close-end,and attach the encoder brush at the above
position by tightening 2 screws (#19).
#19×2
#30×2
#31×2
#33
#34
#17
#16
#19×2
#18×2
#32×2
C part
・
Insert the FPC into the "U" part of the FPC retaining plate (#33).
(
as shown by the arrow
)