7
First Steps
2.3
Close the battery-chamber cover
Close the cover (
햲
) and slide it in the direction
shown until it latches (
햳
).
Replacing Batteries
Turn the camera off
and make sure the power-on lamp has gone out before opening
the battery chamber cover. Batteries can not be replaced with the camera on a tripod.
The Battery Type Menu
After replacing the batteries, check that the option selected for
Battery Type
in the
setup menu matches the type of batteries used
(
80).
Alkaline Batteries
The performance of alkaline batteries can vary widely. Choose batteries from a repu-
table manufacturer.
The EH-62B AC Adapter Kit
The optional EH-62B AC adapter kit can be used to power the camera for extended
periods
(
81).
Do not, under any circumstances, use another make or model of
AC adapter.
Failure to observe this precaution could result in overheating or in dam-
age to the camera.
2
Insert the batteries
2.1
Open the battery-chamber cover
Press the battery-chamber latch and slide the
cover in the direction shown (
햲
) until it opens
(
햳
).
���
햲
햲
���
햳
햳
���
햲
햲
���
햳
햳
2.2
Insert the batteries
Insert the batteries as shown in the label inside
the battery-chamber cover.