Niko JT3000/BC2, Руководство пользователя

Страница: 19 / 20

USER MANUAL – Sorting conveyor – JT3000/BC2
NIKO - Fruit processing machinery
www.niko-si.si
18
7.1.2 ADJUSTING THE TENSION OF THE BELT
The tension of the belt is set by the manufacturer but it can be modified if ever needed.
Sometimes occurs that the belt looses tension due to the weight of the fruit load.
To adjust the tension proceed as follows:
- Localize the upper screws in both sides of the conveyor (shown in the picture below).
- Use a 13mm wrench in order to tighten or loosen the screws and therefore the belt tensioner.
- By turning the screws clockwise the belt tensioner tightens, in the same way, by turning the screws counter
clockwise the belt tensioner loosens.
7.2 WASHING
7.2.1 WASHING THE EXTERIOR OF THE MACHINE
Cover the command box with watertight material (for example polyvinyl).
The equipment can be washed with a soft brush and water and/or with a high pressure cleaner.
The same actions have to be performed on both sides! (e.g. If the right screw is turned clockwise 3
times, the left screw has to be turned clockwise 3 times as well). This will ensure uniform tension.
ATTENTION! It is necessary to isolate the machine during any maintenance work:
- unplug the machine,
- turn the main switch to position 0.
Do not rinse the central command box or the own electric command box directly!