USER MANUAL
– Sorting conveyor – JT3000/BC2
NIKO - Fruit processing machinery
www.niko-si.si
15
6 STARTING AND STOPPING THE MACHINE
6.1 STARTING THE MACHINE
Procedure of turning on the machine:
-
Be sure that the central command box is connected to the power supply.
-
Check that the machine is connected to the central command box, otherwise do it using the correct cable
arranged by numbers and marked with a tag.
-
Activate the processing line by turning the
main switch
to the position »
|
«.
-
The sorting conveyor and the machines connected to the central command box are ready for use.
6.2 STOPPING THE MACHINE
6.2.1
NORMAL SHUTDOWN
If working in manual mode
-
Normal stop of the machine is done by pressing the red button »
OFF
« assigned to the machine (conveyor)
on the central command box, this action will stop just the conveyor.
-
By turning the
mode switch
to “0” position, the machine will stop but also all the machines working in manual
mode.
If working in automatic mode
-
When working in automatic mode it is not possible to stop each machine separately, so it is necessary to turn
the
mode switch
to “0” position (this action will stop all the machines but the mash pump) and then press the
red button »
OFF
« assigned to the mill in order to completely stop the automatic mode.
See chapter 7 for more information about the working modes.
Before starting the machine check all the conditions for a safe functioning:
-
check that there are no objects on the machine, which could block normal functioning,
-
make sure that there are no people standing by the machine and could be endangered when
turning the machine on,
-
check if the electrical cable and plugs are undamaged.
Never plug in the machine with wet hands!
If you wish to stop the machine completely, it is necessary to follow the above-mentioned procedures
and then turn the main switch to 0 position. Be aware that this operation will affect the whole function
of all the machines connected to the central command box.
Содержание JT3000/BC2
Страница 1: ......
