31
EN
350-20056
5. TECHNICAL DATA
Dimensions:
24 x 90 mm (HxW)
56 x 90 mm (HxW) (including non-visible part)
Power supply voltage:
230 Vac ± 10%
Power consumption:
0.8 W
Relay contact:
NO (max. 10 A), light- and motion-sensitive
Maximum load:
incandescent lamps (2300 W)
230 V halogen lamps (2300 W)
all low-voltage halogen lamps (500 VA)
fluorescent lamps (non-compensated) (1200 VA)
economy lamps (CFLi) (1200 VA)
Maximum switching capacity:
140 uF
Maximum inrush current:
80 A/20 ms
Detection angle:
360°
Mounting height:
2.5 – 4 m
Detection range:
circle, 7 – 12 m
Light sensitivity:
30 – 2000 lux
Switch-off delay:
5 s/2 – 30 min
Protection degree:
IP20
Protection class:
class II devices
Ambient temperature:
-5 – 50°C
Quality mark:
CE marked in compliance with EN 60669-2-1
6. WARNINGS REGARDING INSTALLATION
- The installation should be carried out by a registered installer and in compliance with the statutory regulations.
- This user manual should be presented to the user. It should be included in the electrical installation file, and it should be
passed on to any new owners. Additional copies are available on the Niko website or via the Niko support service.
- During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology currently available at the time of installation.
- this user manual, which only states general regulations and should therefore be read within the scope of each
specific installation.
- the rules of proper workmanship.
This product complies with all of the relevant European guidelines and regulations. If applicable, you can find the EC
declaration of conformity regarding this product at www.niko.eu.