19
16-656-01
Read the complete manual before attempting installation and activating the system.
1. DESCRIPTION
The 16-656-01 is a universal module and is part of the range Access Control Design. Via the uni-
versal module, a color image of your visitor can be displayed on a TV, a monitor or pc. While seeing
your visitor’s image, you can communicate with him/her telephonically. The module has a black
enclosure with metal side profiles and is provided with the following in- and outputs:
- RJ45 input for the UTP cable of the splitter, switcher
- RJ12 output for connection of a telephone set;
- RS232 output for connection to a pc (see pc pack);
- screw connector that sends 12V DC or is used as a potentialfree contact;
- coax plug (BNC) for sending a video image to the monitor;
- scart connector for connection of a TV set.
The universal module is a ‘plug and play’ concept: you only have to make the connections and
program the video signal.
2. INSTALLATION
1. orange-white 1. Vsup (+)
2. orange
2. Ground (-)
3. green-white
3. bus H
4. blue
4. telephony (tip)
5. blue-white
5. telephony (ring)
6. green
6. bus L
7. brown-white
7. video+
8. brown
8. video-
fig.1: Color code UTP cable
2.1. Connection to a TV set (via scart cable)
The following cables are required (not provided):
- UTP cable (color code see fig.1) with RJ45 connectors at both sides
- scart cable (length max. 5m) with scart connectors at both sides
- optional: telephone wire with RJ12 connectors at both sides
The UTP cable connects the splitter or switcher to the universal module. The scart cable connects
the universal module to the TV set. The required cabling is shown on the figure below:
4 TEL tip
5 TEL ring
7 VIDEO +
8 VIDEO -
1 + Vsup
2 - Gnd
3 Bus H
6 Bus L
Attention!
Wrong cabling can severely damage
the products in an installation!
EN
Содержание 16-656-01
