
14
10-589
➥
2
Mount the
rear panel
on the wall using suitable
screws
.
orientation arrow indicating the mounting direction
terminals for connection of the wiring
mounting hole for the incoming cable
➥
3
Connect the wiring as indicated on the wiring diagram on page 18.
Note
• In one system, use the same colour code for the same terminals (a, b, P…) for all products of the Access Control Standard range.
• The metal cover can be earthed at terminal
➥
4
If the system includes multiple internal units, configure the
terminal resistor
via
jumper J2
on the inside of the front panel. The default position
of J2 is not connected.
This internal unit is
not
the last device.
J2 in not connected
.
This internal unit is
the last device
:
J2 is connected
.
➥
5
Connect the front panel to the rear panel using the
connecting cable
.
➥
6
To close the video internal unit, place the front panel on the rear panel. Both panels are
held together by powerful
magnets
.
EN