![background image](http://html1.mh-extra.com/html/niko/10-576/10-576_product-information_1689553071.webp)
71
EN
10-576
Set video BP-border and door call BP-border
–
–
x
Image connection upon incoming floor call (floor video function)
–
–
x
Assign short text message groups
–
–
x
Screen memory 10-845 always locked
–
–
x
Screen memory 10-845 on / off (in the comfort mode)
–
–
x
9.2. Load factory settings
All manually set settings can be returned to the factory setting.
• Simultaneously hold the navigation keys up and down for 8 s.
A confirmation signal sounds. The factory setting was successfully loaded.
9.3. Programming the function key with the service unit
The internal unit functions as a simplex speech device. Use commands “9“ to configure comfort-simplex speech device (see product information Service unit 10-870):
Programming using the commands “9“ must be launched once using the command *95 # Ser.-Nr. #. After, program the function key with the service unit.
Introduction
95
Ser.-Nr.
Call diversion
90
Ser.-Nr.
ZielSNr.
Ring-and-come-in
91
Ser.-Nr.
Internal call
92
Ser.-Nr.
IntSNr.
Control function 8
93
Ser.-Nr.
Restore light switch function
94
0
Ser.-Nr.
Parallel assignment
Deactivation of the parallel assignment = assigning
serial number 0.
99
Ser.-Nr.
ParSNr.
Ser.-No.: the serial number of the newly to be configured internal unit
TargetSN.o: the serial number of the target internal unit to which it must be diverted.
IntSNo.: the serial number of the target internal unit which must be internally called.
ParSNr: the serial number of the internal unit to which a newly to be configured internal unit is assigned.
9.4. OSD-menu
You can move through the OSD-menu, in the displayed screen memory
a)
and in the live image using the navigation keys up and down. Upon delivery, not all
functions are configured. Symbol are only displayed in the OSD-menu once that function has been configured (screen memory settings and short messages).
Niko Configuration SW is necessary to activate the Screen memory and Short messages functions.
The live image can be activated by pressing the image key or the speech key. On receiving an video call, the live image is automatically activated.
The live image switches off automatically:
• if no keys are pressed for 80 sec.
• if the speech connection is terminated
• if the video channel is used by another device (not during speech connection).
a) only if 10-845 is installed
Содержание 10-576
Страница 2: ...10 576 03 Nederlands 23 Français 43 Deutsch 62 English 82 Slovenčina ...
Страница 102: ...Notes 10 576 ...
Страница 103: ...10 576 ...