25
EN
Read the entire manual before attempting installation and activating the system.
1. DESCRIPTION
The
internal video unit10-571
from the
Access Control Standard
range is always part of a system
with one or more external units and one power supply.
The internal video unit 10-571 allows you to:
• open a door
• make a call
• see the visitor
• deactivate the ring tone
• switch the lighting on/off
• call up camera images
The image and call settings can be changed via a menu on the display.
2. OPERATION AND USE
Also see the user manual.
Function keys and LEDs
•
Opens the door
and ends the communication 4 seconds later – standard setting.
• Switches the
light relay
when a call has not yet been started.
*
• Begin and end a
call
by pressing briefly.
• In the event of a lot of noise in the immediate area, you can press and hold this key
while you speak (walkie-talkie principle).
Switches off the
ring tone
. The red LED lights up.
Displays the
camera image
and pages through the available camera images.
Performs one of these functions:
• switches the
light contact
of the power supply (10-80x) (standard function)
•
transmits control function 8
to operate relay 10-831
• makes an
internal call
• activates the “
ring-and-come-in
” function
• activates
call diversion
(The internal unit is programmed in parallel, as SLAVE, on another internal unit.)
*
• Displays
menu
from the stand-by mode to change the bell volume and the ring
tone.
• Changes the image settings when the camera is active.
• Pages through the menu options.
Changes the selected parameters in the menu.
10-571 Installation manual internal video unit