1.5V
1.5V
1.5V
3
2
1
2
3
1.5V
ON
OFF
1
3
2
1
4
VEHICLE
2
1. To remove battery lid, loosen screw to
open.
2. Slide open the battery lid in the
direction as shown in the figure, while
lightly pressing its center.
3. Insert 1.5V (AAA/LR03) batteres x3
with the polarity (+/-) as shown on
the bottom of battery compartment.
Replace the battery lid, following the
removal procedure in reverse.
NOTE:
There is no on/off switch on the Transmitter.
Moving the sticks turns it on automatically.
1. Turn off vehicle.
2. Loosen screw to open battery lid.
3. Remove battery lid.
4. Insert 1.5V (AA/LR6) batteries x4
into battery compartment with
correct polarity (+/-). Place
battery lid back in position and
lock properly.
NOTE:
For best performance, always use alkaline batteries only. To remove the batteries, reverse the
installation procedure.
Insert antenna wire
from product into tube
Tie knot with any
remaining antenna wire
(Do not pull wire tight)
Slide tube down antenna
wire and into hole
in product
ANTENNA ASSEMBLY
BATTERY INSTALLATION
TRANSMITTER
C
M
Y
CM
MY
CY
CMY
K
FAR_94130_16SC_RACING_ENG_IM_042015.pdf 3 20/4/15 11:48 am