Male connector has 4 pins.
Female connector has 4 pin holes..
There is a plastic protrusion on the inside of the male connector. There is a groove in the upper part of the connector.
Important!
Connect the connector so that the protrusion fits to the groove.
Please note that the connector must be connected fully. Confirm that the groove matches the protrusion before connecting.
IMPORTANT INFORMATION ABOUT THE PRODUCT INSTALLATION IN A SAUNA!
o
Under no circumstances the transformer should be installed in humid premises or sauna!
o
The maximum operating temperature of the transformer electric cable is 85˚С.
o
The connecting cable and LED panel connection cable withstand temperature 150 °C.
o
The maximum operating temperature of the lamp is 120 °C.
CAUTION!
Do not install the lamp in the immediate vicinity of the stone heater!
Do not install the lamp at or in the immediate vicinity of the ceiling!
Install the lamp on the wall at the distance of min 20 cm from the ceiling.
LAMP WALL MOUNTING
A.
B.
A.
Secure mounting clips at the wall, using wood screws. Distance between clips should be 50 cm.
B
. Press the lighting unit into the clips.
