When viewed from the front (with the display on the right side,) if the right side is
elevated the angle reading will be an increasing positive number.
If the angle is out of range an error message will be displayed. For negative angles, a
"‒" sign is also shown. In the error message, the "E" on the elevated side will also blink
to indicate the direction of the out-of-range error.
The gauge will display the angle of inclination as mm/m, which is the elevation for the
surface over a distance of 1 meter.
The actual height difference over a specified distance or pitch can be calculated as
follows:
Pitch
Height Difference / Pitch = Reading ×
1000 [mm]
For the example with the measurement pitch = 100mm,
100
Height Difference / Pitch = Reading ×
1000 [mm]
= Reading × 0.1 [mm]
-10-
Display
Display
Display
Error
Blinking
Blinking
Display (mm)
1m
