Nihon Bisoh Co.,Ltd. BISOMAC210 3Phase MM2014/11
KH-2014008 Rev.4
28
STEP 3
Installation of suspension wire rope
1. Insert the tip of the wire rope to wire rope inlet of BISOMAC approximately 16 inch.
2. Push UP button while pushing wire rope in to BISOMAC lightly until the wire rope feeds
automatically.
3. Make sure that the wire rope comes out from outlet without any obstruction and moves
both up and down direction freely.
4. Distances between riggings and wire rope inlet of the hoist must be equal as suspension
wire ropes are suspended vertically.
5. To prevent the platform from running off the suspension wire ropes, secure the tail line as
Picture-5.
[Picture-5]
Suspension wire rope
Clamp
Tail line
