NightWatcher SWNW520, Инструкция по использованию и уходу

Страница: 7 / 9

7
Operation (continued)
5
Testing the light fixture
6
Ensuring correct operation
NOTE:
Allow for approximately 1-minute calibration time before
the sensors resume normal activity.
□
Plug in the unit to active the light, the light is now
under Night Mode.
□
□
Movement will activate the sensors and turn the
light on. The light will turn the light head to the
detected zone for approximately 3 minutes.
□
After the light is activated, keep out of the detection
area and the light will switch off automatically after
3 minutes. The light will be activated again when it
detects any movement. If there is continuous
movement in the detection zone, the light will stay
on unit movement ceases (after 3 minutes).
□
To ensure correct operation of the sensor,
mount the unit so that the motion passes
across the motion sensor according to the
Good Sensitivity diagram below.
Top View
Good Sensitivity
Less Sensitivity