5
INSTALLATION
Step 1. Installing the Mounting Bracket
Line up the holes of the light back cover plate D with the holes on your wall. Using
the two Drywall Screws C and fix it tightly in ide the wall using the
Plastic Masonry Plug
E.
WARNING: Risk of electric shock. Disconnect power at fuse or circuit breaker
before installing or servicing.
CAUTION: Do not cut any wires with factory installed wire connectors or
remove the wire connectors.
Step 2: Wiring the Light Fixture
Connect the light wires inside the connection block .The mains wire should pass through the
Plastic Cover Bracket (D)
Neutral (Blue) to Neutral (Blue)
Earth (Green) to Earth ( Green/Yellow}
Live ( Brown) to Live (Brown )
Note: Make sure the polarity is correct.
