Nightowl Stage Lighting THD Series, Руководство пользователя

Страница: 70 / 90

70
Username: The username for the outgoing email account.
Password: The password for the outgoing email account.
SMTP Server:
The SMTP server address of your email provider. For commonly used mail server settings, see
“Common Email Provider Settings” below. If your email provider is not listed in the table, use your Internet
browser to easily find your email provider’s server address and port by searching ‘smtp settings’ followed by
the name of your email provider.
SMTP Port: The SMTP port used by your email provider.
Enable SSL: Whether the email server you are using requires a secure link.
Sender: Enter a name to identify the sender of the email notification.
Sender Address:
The address from which you are sending the email. This will be the username you
have set up for the email server you are using, followed by “@” and then the email server. For example:
“username@gmail.com” or similar.
Select Receiver: Select an e-mail recipient to configure. The DVR can send email notifications to up to three receivers.
Receivers Address: The email address of which you would like the DVR to send emails. This can be any
email address you like, however, bear in mind that the DVR might send a large number of automatic emails
under certain conditions.
Enable Attach Picture: When this is selected, the DVR will attach a small image to each email alert (where
applicable). For motion-based email alerts, this will be an image of whatever triggered the motion detection.
Interval: The length of time that must elapse after the DVR sends an email alert before it can send another.
Common Email Provider Settings:
Gmail Server Address:
smtp.gmail.com
Hotmail/Live.com Server Address: smtp.live.com
AOL Server Address: mail.aol.com
Yahoo Server Address:
smtp.mail.yahoo.com
Port: 465 or 587
Requires SSL: Yes
Port: 465
Requires SSL: Yes
Port: 465
Requires SSL: Yes
Port: 465 or 587
Requires SSL: Yes