ProAxis
plus
™ Electric Profiling Bed and Pressure Area Care System
Instruction for use and trouble shooting guide
________________________________________________________________________________
ProAxis Plus Operating Instructions 3.1 Dated 18/05/11 10/24
2.4
Patient / Nurse Handset
The patient / nurse handset is permanently attached to the bed and is a simple control to
operate the basic functions.
Variable Height, Backrest and Footrest Buttons
Variable Height -
The height of the platform can be raised or lowered by using the
handset control buttons that are shaped as arrows and marked
Bed Up
and
Bed Down
.
Backrest -
To raise or lower the backrest of the platform the buttons marked
Head Up
and
Head Down
should be used.
Footrest -
To raise or lower the footrest the buttons marked
Foot Up
and
Foot Down
should be used.
Preset Buttons
There are two preset positions available and are achieved by pressing the relevant buttons
on the handset control. The buttons have to be pressed continuously for position to be
achieved, only one button can be pressed at a time.
Chair Preset Position -
To achieve a chair position with the platform profiled to the sitting
position and the frame tilted down at the footend, the button marked
Chair
should be
pressed.
Flat Preset Position –
To make the bed go flat, press the
Flat
button.
Bed Up
Head Up
Foot Up
Foot Down
Head Down
Bed Down
Preset Flat Position
Preset Chair Position
