NIFTYLIFT HR21 4x4, Инструкция по эксплуатации и безопасности

Страница: 27 / 79

Height Rider/SP Series
Operating & Safety Instructions
English/USA – 07/17
Original instructions
25
Base Levers
1 2 3 4 5 6 7
1 Operates Platform Levelling Forward for Up Backward for Down
* 2 Operates the Flyboom Up for Up Down for Down
* 3 Operates Telescoping Up for Out Down for In
*
4 Operates the Link Booms Up for Up Down for Down
*
5 Operates the Upper Boom Up for Up Down for Down
* 6 Operates Slew/Swing Up for Right Down for Left
7 Operates Front Wheel Steer Forward for Right Backward for Left
*
More than one function can be operated at the same time
4.2.2 OPERATION
ALWAYS ALLOW THE ENGINE TO WARM UP BEFORE OPERATING
ALL MODELS
1) Ensure all red emergency stops are out and engine battery disconnect knob is turned fully
clockwise.
2) Turn key switch at ground control station to Ground (Single turn clockwise).
3) For Battery powered operation, go to step 7).
4) For Diesel powered operation, go to step 5).
DIESEL ENGINE
Note : On the HR21D (Diesel only) the engine will not start if the footswitch or Green button are
pressed, or the machine is switched to generator.
5) COLD ENGINE : - turn the Diesel Glow/Start selector to the Glow position (anti-clockwise). This
engages the glow plug pre-heat system. Hold for 5-10 seconds then turn the key to the Start
position (fully clockwise) and the engine will fire.
6) WARM ENGINE : - turn the Diesel Glow/Start selector to the Start position (clockwise) and the
engine will fire.
Note : Unless the diesel engine is running, the HR21 Hybrid will automatically default to the electrical
power source (battery).