nifty TrackDrive TD150T Series, Инструкция по эксплуатации и безопасности

Страница: 32 / 41

TrackDrive (TD) Series
Operating & Safety Instructions
English/USA 12/09
30
3) Hi/Low Drive
4) Power Control Button – Press and hold Green button to enable machine.
5) Duty Selector – Three position control allows operator to select between:-
Left : Jacks/ Outrigger operation
Centre : Booms only
Right : Track Drive and variable width control.
6) Selector switch – Turn to ‘On’ position to enable machine controls.
7) Glow/Start Selector – Turn to the left and hold for 3 – 4 seconds to energise the glow function
before starting. Turn to the right to fire the engine, release when engine fires.
8) Cage Weigh – Illuminates if Safe Working Load (SWL) has been exceeded in Cage.
9) Tilt Alert – Illuminates when excess drive angle is detected. High speed drive is lost until
machine returns to level.
10) Water Temperature – Illuminates if coolant temperature is too high.
11) Engine Oil Pressure – Illuminates and buzzer sounds if pressure drops. Check oil level. Note;
Will also activate when Selector (6) is turned ‘ON’, until engine has been started and run to
achieve correct pressure.
12) Track Width – Increases or decreases width of tracks when used with Power Control Button.
13) Horn – Operates audible alarm.
14) LH Track Direction – Switches between Forward and Reverse.
15) RH Track Direction – Switches between Forward and Reverse.
4.4.2 BOOM FUNCTIONS
1) Push and hold green "Power Control" button
1 2 3 4 5
2) Select lever 1, 2, 3, 4 or 5 for desired function
P14927/001
Courtesy of Crane.Market