nifty TrackDrive TD120T Series, Инструкция по эксплуатации и безопасности

Страница: 32 / 55

TrackDrive (TD) Series
Operating & Safety Instructions
English/USA – 02/17
30
ALL MODELS
11) Push and hold green Power Control button (if fitted), or depress footswitch.
12) Select the boom function required and operate hand levers in full accordance with
manufacturers Operating and Safety manual.
13) When not in use return machine to stowed position, fully raise and stow all outriggers, turn the
key to the “OFF” position (anti-clockwise) and remove key.
EMERGENCY PROCEDURES
1) Push in red emergency stop to shut down all functions.
2) Use manual hand pump to provide motive power and manoeuvre the machine as normal using
the hand levers (Platform or Base).
PLATFORM CONTROL STATION
1) Emergency Stop Button – Push to operate, twist knob to re-set to the ‘Out’ position.
2) Horn – Operates audible alarm.
3) Tilt Alert – Illuminates when excess drive angle is detected. High speed drive is lost until
machine returns to level.
4) Hi/Lo Drive – Not used.
5) Power Control Button – If fitted .
6) Battery Condition Meter – Not used .
7) Key Switch – Turn to left (position I) for AC power, turn to right (position II) to permit the diesel
or petrol engine to start.
8) Glow/Start Selector – Turn to the left and hold for 3 – 4 seconds to energise the glow function
before starting. Turn to the right to fire the engine, release when engine fires.
9) Max RPM Selector – Switches between the High and Low Rev setting on the engine. High
speed is not available if booms are in operation or machine is driven on an excessive slope
(>10
0
).