nifty TrackDrive TD120T Series, Инструкция по эксплуатации и безопасности, Страница: 12 / 55

TrackDrive (TD) Series
Operating & Safety Instructions
English/USA – 02/17
10
2.1.34
The engine must be shut down while fuel tanks are being filled. Fuelling must be done in a well-
ventilated area free of flame, sparks or any other hazard that may cause fire or explosion.
PETROL
(GASOLINE), LIQUID PROPANE AND DIESEL FUELS ARE FLAMMABLE.
2.1.35
NEVER START THE NIFTYLIFT IF YOU SMELL PETROL (GASOLINE), LIQUID
PROPANE OR DIESEL FUEL. THESE FUELS ARE HIGHLY FLAMMABLE
2.1.36
The operator must ensure that engine powered machines are used in a well-ventilated area to minimise
the risk of carbon monoxide poisoning.
2.1.37
The operator shall implement means provided to protect against use by unauthorised persons.
2.1.38
Never remove anything that may affect the stability of the machine such as, but not limited to, batteries,
covers, engines, tyres or ballast.
2.1.39
The operator must ensure that the controls are not obstructed (e.g. by tools or equipment) and clear
access to the Emergency Stop is available at all times.
2.1.40
All persons in the cage must take suitable precautions to prevent items falling or being ejected from the
cage. E.g. Tethering tools to the machine or operator if practical and an assessment of any resulting
risks is acceptable.
2.1.41
Hydraulic oil escaping under pressure can
penetrate the skin and cause serious injury.
Do not allow hydraulic oil to squirt or spray.
Seek immediate medical attention in the event
of hydraulic oil penetrating the skin. Wear
chemical-resistant protective gloves and
suitable eye protection when handling
hydraulic oil.
2.2 ENVIRONMENTAL LIMITATIONS
All Niftylift machines are limited to operation as previously described and any slopes must be adjusted
by use of the outriggers and jacks. Unless specifically configured otherwise, the machine will have
short time rating for operation in extreme temperatures, i.e. reduced battery cycle times for low
temperatures such as freezers, food storage etc. and cooling limitations for high temperatures as oil
temperature must remain between -23° and 93° Celsius.
The recommended operational range for these machines is - 5°C to +40°C. Please contact
Niftylift Ltd for special considerations if the machine is required to operate outside these
temperatures.