TM Eco Series
Operating & Safety Instructions
USA – 07/11
Issue 01
12
3.3.3
MONTHLY SAFETY CHECKS
1)
Check the engine oil level (if applicable).
2)
Check the wheel nuts (torque 80ft lbs/110Nm or 110ft lbs/150Nm Traction Drive Option).
3)
Check outriggers for condition, security and operation.
4)
Check that the boom rotation gear worm is secure and correctly in mesh. Clean and re-grease.
5)
Inspect brakes for operation and wear.
6)
Grease the knuckle and centre post.
7)
Inspect the engine fuel tank for damage or leaks.
8)
Grease the tow hitch assembly.
9)
Lightly oil the jack pad ball joints and outrigger housings.
10) Lightly oil the locating pins on outriggers and axles and the axle clamp bolts.
11) Oil and check the operation of manual outriggers.
3.3.4
ANNUAL SAFETY CHECKS
1)
Check that all pivot pins and their tag bolts are secure.
2)
Inspect for any cracks or badly rusted areas on booms and chassis.
3)
Change the hydraulic oil filters.
4)
Inspect the suspension on each axle unit.
5)
Check that rotation gear ring bolts are secure (torque 155ft lbs. 210Nm).
6)
Inspect the wear of jack threads (manual outriggers).
Содержание TM34M ECO Series
Страница 2: ......
