Nidec Profinet Module, Руководство пользователя

Страница: 8 / 22

4. Device Configuration
To permanently configure attributes in the Profinet Module, use the Ethernet Device Configuration Tool
and untick "Store settings temporary".
NOTE
The Error LED flashes whenever the module is receiving power but is not connected to a
network. The Error LED will flash throughout the configuration process.
4.1 Ethernet Device Configuration Tool
The Ethernet Device Configuration Tool can be downloaded from www.nidec.com.
To configure the device using the Ethernet Device Configuration Tool:
1. Attach the module to a soft starter.
2. Connect one Ethernet port on the module to the Ethernet port of the PC.
3. Apply control power to the soft starter.
4. Start the Ethernet Device Configuration Tool.
5. Click on Search Devices. The software will search for connected devices.
6. The search results will contain two entries for each connected device. Select the DCP Protocol
entry for the required device.
8
Profinet Module: User Guide
www.nidec.com Issue: B