Thank you for purchasing
NIDEC COPAL ELECTRONICS CORP. product.
In order to use the product correctly and most
appropriately, please completely read this manual before
use and keep it for future reference.
1
This caution mark indicates a chance of physical damages to the user and/or the product
if it is used improperly and/or incorrectly. The damage can be substantial.
HANDY MANOMETER
PG-100N
Series
Important Information and Warnings
Operating Precautions
（1）The applicable media are air and non-corrosive gases.
Use of the product with water or corrosive fluids may cause product failure. Furthermore, since the product is not explosion-proof, never use it for
flammable gases.
（2）Maintain the measuring pressure within the pressure range as stated in specifications.
Pressures exceeding the maximum pressure rating may cause product failure.
（3）Be careful not to mix foreign materials in the pressure port.
Mixing a foreign material in the port may cause product failure or air leakage. If there is a possibility of mixing foreign materials into the port, use
the product with a filter.
（4）Be aware of possibilities of accidents related to the strap.
Swinging the product intentionally in the air by holding the strap may result in unexpected accidents, injury or product damage. Be sure to use the
product with its main body gripped firmly.
（5）Be careful not to give external shocks to the products.
External shocks such as hitting and dropping may cause product failure.
（6）Installation of attachments
When installing an attachment to the pressure port, the tightening torque should be set at around 1 N・m.
（7）Attention for analog output function using.
No voltage or signal should be applied to the CAL terminal by tha faulty wiring. Failure to heed this warning may result in product malfunction or
damage to the main body.
Moreover, do not lose the battery cover when the analog output function is used.
●The product is not explosion-proof. Do not use the product in designated areas where
explosion-proof specification is required.
●The product is not drip-proof /dust-proof.
●The product is designed for measurement of intended articles and does not feature control
functions that ensure security, such as prevention of accidents.
Instruction Manual
Ver.4.1
Head Office: Nishi-Shinjuku Prime Square,
7-5-25 Nishi-Shinjuku, Shinjuku-ku, Tokyo 160-0023, Japan
https://www.nidec-copal-electronics.com
For inquiries regarding the product, please contact:
CAUTION
