5
6 1
Connector
Connector No.
１
２
３
４
５
６
Description
External power input （5V）
Analog output terminal （±1V）
GND
CAL
CAL
CAL
Manufacturer
JST Mfg. Co., Ltd.
Housing
ZHR-6
Contact
SZH-002T-P0.5
SZH-003T-P0.5
Wire gauge
AWG28〜26
AWG32〜28
Pressure range
101R
102R
103R
Rated pressure［kPa］
−10.00〜10.00
−100.0〜100.0
−100〜1000
Output voltage ［V］
−1.000〜1.000
−1.000〜1.000
−0.100〜1.000
Analog Function
Open the battery cover on the back of the main body and insert the pre-wired connector according to the table shown below. After applying external power,
press the POWER button to turn on the power. Be sure to use the product with the batteries removed. The mode will not switch to the analog output mode
unless the batteries are removed.
Analog voltage as indicated will be output to the analog output terminal.
Pressure range, rated pressure and output voltage are shown to the table below.
No voltage or signal should be applied to the CAL terminal since it is for adjustment use only.
Failure to heed this warning may result in product malfunction or damage to the main body.
Periodical Calibration
If you would like to calibration request, please contact the sales office where you purchased.
Warranty
The warranty period for the product shall be one year. A failure due to causes attributed to design or manufacturing defects during the period one year
from the date of delivery shall be repaired or replaced free of charge. However, the term “warranty” herein referred to shall imply the warranty for the
product unit only, and damages from failure of the product shall be excluded. The following shall be excluded from the warranty:
⑴Failure or damage caused by improper use and careless operation in violation of the Operating Instructions.
⑵Failure or damage caused by inappropriate modification, adjustment, or repair.
⑶Failure or damage caused by acts of God, fire, or other unavoidable accidents.
⑷Replacement of accessories (cables, etc.) and supplies that come with the product.
[Note]
Copying or reprinting the entire or part of the Operating Instructions shall be prohibited except where exceptions to copyright laws apply. Furthermore,
descriptions stated in the Operating Instructions are subject to change without prior notice.
