Nidec DT-3011P, Инструкция по эксплуатации

Страница: 34 / 36

33
6
Troubleshooting
Information appears on the digital display,
but no emission occurs.
Emission occurs
but does not match the display.
Nothing is indicated on the display
and no emission occurs.
Factors
The Xenon lamp failure.
The Xenon lamp failure.
Causes
Internal circuit failure.
Internal circuit failure.
At measurement,
the object does not stand still completely
Symptoms
Emissinon occurs inconsistently.
Emission sometimes stops.
Display does not change
by turning the dial.
Internal circuit malfunction.
The Xenon lamp failure.
Internal circuit malfunction.
Internal circuit malfunction.
The rotartion speed cannnot
be set accurately.
Internal circuit failure.
Internal circuit failure.
Due to resolution.
The Xenon lamp life.
Internal circuit failure.
Internal circuit failure.
The Xenon lamp life.
It caanot be set below the second decimal
place.
Troubleshooting
Replace the lamp,If the problem
has not been solved, ask for repair.
Replace the lamp,If the problem
has not been solved, ask for repair.
Ask for repair.
Replace the lamp,If the problem
has not been solved, ask for repair.
Ask for repair.
Ask for repair.
Solution
Do you have explosion-proof models? No. Impossible at present.
Can I take a picture? No.
It does not have
the signal for pictures.
Is this washable? Equivalent to IP63. Do not wash.
Is it possible to see the object 2m away?
It depends on the surrounding
environment.
Please check it by using demo.
Can I shoot the video? No.
It does not have
the signal for the video.
Q ＆ A
Questions Answer Note