Add/Edit/Delete
CLM-20 CardMark
Page 20 of 27
Nidec Copal Corporation
Image
By selecting the item you wish to change and clicking [Change Param.], property dialog will appear.
If you click [Check], displayed information will be updated. If you click [OK] edited information will
be fixed.
4.6. Sequential Numbering
Characters and barcodes can be designated the sequential numbering function.
It is for the marking of serial number or anything required of sequential numbering on a card. In the
use of characters and barcodes, designate the following sections.
Attention:
Number is counted up after the marking operation is done.
It is counted up even when the marking ended in error.
Please do not forget to save the file each time you temporary stop marking operation using
this function.
After read the file, please make sure a number is correct.
In the use of Auto marking function, an updated default value is saved automatically in a file.
Specify characters
coming after digits.
Specify the default
number.
Specify number of
digits.
Specify numbers
increasing on each
marking.
You can display and check the print result before printing.
Check to specify
numbers.
Specify characters to
precede the numbers.
