- 5 -
Turn the power switch off and unplug
the power cable for cleaning, testing
or adjustment. (It is recommended to
do the same if the wheel will not be in
use for a long period.)
DO NOT POUR WATER ON THE
WHEEL TO CLEAN IT.
Wipe the wheel down with a damp sponge
or cloth. (Splash pan can be cleaned if it is
removed from the wheel.)
The power switch has two functions. One
is to turn wheel on and off. The other is
a reset function. This wheel has a safety
feature for over load. In order to reset, op-
erator must switch off and on again. (Don't
forget to press the hand lever all the way
down before turning switch back on.)
①
Switch the on switch to the off position
(refer to diagram).
②
Return the lever handle to the off
position(refer to diagram).
③
Turn the power switch back on.
stop
①
③
②
Use caution when performing any mainte-
nance, inspection, and adjustments.
stop
stop
①
Press the lever handle all the
way back to stop wheelhead.
①
Press the lever handle all the
way back to stop wheelhead.
If you change a switch to counter clockwise,
wheelhead will be stopped.
After pull the lever all the way back and
move the lever toward, turn wheelhead
counter clockwise.
②
Turn the power switch off.
②
Turn the power switch on.
③
Turn on a changeover switch
to select direction.
Power switch flash.
①
Please check the lever handle
all the way back to stop position.
④
Press the lever handle from the
stop position to increase speed.
Step backward to reduce speed.
stop
faster
OFF
ON
②
Change the direction with a switch.
A
B
Operation Starting and Stopping
Operation Power Switch
How to change Wheelhead Direction
・
Start
Ａ…Clockwise
Ｂ…Counter clockwise
・
Stop
Maintenance
