www.nicolaudie.com
Sunlite Touch-sensitive Intelligent Control Keypad
Ref. STICK-KE1
© Nicolaudie-Sunlite 1989-2015. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Page 3
V 1.4
Rechargeable
battery*
11.5 mm
128 mm
168
mm
Technical datasheet Revision date 20 Mar. 2015
Touch-sensitive
user interface
Screw-terminal
rear connector
(9 pins)
Ethernet socket
(RJ45)
Extension socket
rear connectors
(2x10 pins)
Front access
connections
(open cover)
Connections
SPECIFICATIONS / CONNECTIONS
Built-in
features
screw-terminal
rear connector
(9 pins)
extension socket
rear connectors
(2x10 pins)
front access
connections
(open cover)
Power Supply
6V DC 0.65A, supplied
•
USB
DMX Output #1
First universe, 512 channels DMX512 output
•
•
DMX Output #2
Second universe, 512 channels DMX512 output
(*)
•
USB
USB 2.0 communication for PC/software
•
Ethernet
Advanced networking features
•
Ports 1,2,3,4
4 Contact closure inputs, connect to ground for operating
•
•
Ports 5,6,7,8
4 Contact closure inputs, connect to ground for operating
•
User interface
14 buttons, 1 fader, 28 leds (Touch-sensitive keypad)
•
power/data leds
SDCARD
Micro sd card for stand alone memory use (supplied)
•
RESET
Push button for reset operation
•
RS232
RS232 Serial communication for external synchronisation
•
Output relay
Automatic Stand by 5V signal
•
Clock
Real time clock and calendar
•
Infrared receiver
Easy learning triggering from any 36Khz remote control
•
Service
*To replace the Li-Ion rechargeable battery :
1. You need a rechargeable 3.6v LIR 2032 replacement battery
2. Remove the back panel by pulling down and sliding it out.
3. Using a paper clip push the battery from the bottom so it slides out
of its cage.
4. Slide the replacement battery in from the top, making sure the posi-
tive side is facing up.
5. Replace the back panel by pushing it up into place.
Servicable parts include:
•
Memory card - used to store the scenes
•
Battery - used to store the clock/calendar
•
DMX Chips - used to drive the DMX (see p2.)
power
led
on/off
switch
micro
SD
data
led
mini
USB
reset
button
