7600RF RF Receiver [Preliminary]
User’s Manual
4 Device
Description
The 7600RF RF Receiver for LonWorks network in automation. Its peripheral
scope has been specially designed for the use as switch control for device
spreading control of applications such as lighting control or equipment control
use in home automation control system.
4.1
Hardware Survey
The 7600RF RF Receiver disposes of one LonWorks circuit for each.
4.2
Operation and Display Elements
The 7600RF RF Receiver is fitted with a service button accessible via a
small gap on the side (see Figure. 1.1,
8
). Activation of the buttons
generates a service-pin message transmitted via the LonWorks network.
The processor status as well as the service-pin status are displayed by the
service LED (figure. 1.1,
A
), which is on while the service button is
activated. By use the network management function Wink the service LED
flashes.
Furthermore the 7600RF RF Receiver is fitted with a reset LED (figure. 1.1,
B
), displaying the availability of device occur reset. The LED is connection
to an I/O pin of the Neuron chip processor.
4.3
Connection Pin Assignment
The following tables show the connector pin assignment of the individual
connectors. Connections the
1
marking cf. Figure. 1.1 On previously page.
In each clamp block pin 1 is situated on the left. For further wiring
information see figure 3.2.
LonWorks Network Connection
The bus line can be connection either to Net . No polarity has to be
considered by connecting the LonWorks network.
8
Rev.1.0B
