7600RF RF Receiver [Preliminary]
User’s Manual
In
Virtual KeyPad Object
usually
setting the entire control algorithm
and working together with
SwitchCtrl network variable value.
ctrlCMD
n
.limitMin
Setting value of process button message id minimal id
ctrlCMD
n
.limitMax
Setting value of process button message id maximal id.
ctrlCMD
n
.ctrlType
Setting what kind of process will to do. When V_SwitchCtrl received
a data from another LonWorks device(s).
About ctrl_Type enumerate list as following shown.
UCPTswValTable
UCPTswValTable is for all the Switch
Value Table define.
Responsible when UCPTkeyPadCP
value assign to
ctrl_CMD, and
ctrl_Type of ctrl_CMD equal to
Ctrl_PresetInex
reference value.
All of the value data are store in this
property.
ctrl_Type enumerate list
Name of enumerate
Description
Ctrl_NOP
Nothing to do.
When V_SwitchCtrl network variable received data value.
Ctrl_PresetValue
Direct pass value.
When V_SwitchCtrl network variable received data value to
V_Switch network variable. It’s for output purpose.
Usually, in 5006L programming model first Virtual KeyPad Object
should setting on this.
Ctrl_ PresetIndex
Get value from index table.
The UCPTswValTable configure property is an index table for
Ctrl_ PresetIndex parameter.
If selected Ctrl_ PresetIndex and then you have to setting all the
value in the UCPTswValTable configure property.
Ctrl_InactiveSw
Setting button as an Inactive (Off status) command.
When button was release. (also call this for Off status).
18
Rev.1.0B
